Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case you'll need to find some plastic spacers to help the new pane to fit properly into the frame of the window.

If you plan attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously may require removal before a fresh layer is applied. It is important to remember that when it is about upvc window repair window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze It could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to change a window hinge but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to give assistance.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be misaligned due to wear, creating an opening where the sash and frame meet. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock may be disaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace these.

The second most frequent reason for draughts is window repair near me seals, these can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be cheaper to replace them rather than repair them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional immediately.